Raspberry Pi Pico H – Pico with Headers Soldered

Description

Official Raspberry Pi Pico H (Headers Soldered) is a low-cost, high-performance microcontroller board built around the RP2040 chip, Raspberry Pi’s own dual-core ARM Cortex-M0+ silicon. It’s everything needed to get started with embedded and IoT electronics projects, with the added convenience of pre-soldered male headers — ready to drop straight into a breadboard, no soldering required.

The board carries minimal but essential onboard circuitry: a 5V-to-3.3V power regulator, a single green status LED on GP25, a BOOTSEL button for USB drag-and-drop programming, the RP2040 chip itself, 2MB of QSPI flash storage, and a crystal oscillator. All GPIO pins are 3.3V logic only (not 5V-tolerant). Header spacing is 2.54mm, keeping it fully breadboard-compatible.

Features

• RP2040 dual-core ARM Cortex-M0+ processor, up to 133MHz
• 26 GPIO pins including 3 analog (ADC) inputs
• Pre-soldered headers for immediate breadboard use
• Wide input voltage range: 1.8V to 5.5V
• Compact 21mm x 51mm form factor
• Low-power sleep and dormant modes
• USB drag-and-drop programming via BOOTSEL button
• Castellated module edges for surface mounting

Applications

• MicroPython/C learning and embedded development
• Sensor interfacing and data acquisition projects
• Robotics and motor control
• Breadboard prototyping requiring no soldering
• Battery-powered and low-power embedded devices

Usage Note

Hold the BOOTSEL button while connecting via Micro-USB to enter USB mass-storage programming mode; all GPIO pins are 3.3V logic only — do not connect 5V signals directly.

Package Includes

• 1 x Official Raspberry Pi Pico H (Headers Soldered)

Product image is for representation only; actual product may vary slightly in packaging or markings.